|11-03-2013, 11:00 AM||#1|
Join Date: Aug 2013
Location: Nottingham, United Kingdom
Thanked 0 Times in 0 Posts
Black Tinted Finish on CFRP
There are some tiny errors on my CFRP part and I would like to partially hide them with a final black tinted clear coat of some description with an aerosol can. I have never spray painted anything before and would like some advice of how to do it..
The CFRP part has had a final layer of clear epoxy gel coat, flattened with 120-grit wet and dry and finally 800-grit (no intermediate grit available at the moment).
Could you talk me through this? Do I use just standard plastidip black and then laquer?http://www.dipyourcar.com/forums/sho...llight-Tinting
|black, cfrp, finish, tinted|